Plaster, Weld-Crete, Structolite, Feather Finish
At Cross Country Supply, Home of the EIFS Depot, we are proud to offer a variety of Plaster products.
|Weld-Crete||Weld-Crete is a bonding agent that bonds new cement to existing cement structures. Weld-Crete is rolled on to the existing structure and should be left 1hour-10 days before the application of new cement. This product may be used on concrete, brick, cement block, metal, slay tile, ceramic tile, marble, or glass.||118.95|
|Structo-Lite 50 lb Bag||Structo-Lite Interior Plaster Basecoat is a mill-mixed perlite-aggregate gypsum plaster. It requires only the addition of water at the jobsite. Structo-Lite Basecoat is USG’s most lightweight and highly insulated plaster. Structo-Lite Basecoat provides a plastic working material that will conform to various designs and help achieve durability in walls and ceilings. It can be applied by hand or machine methods on gypsum or metal lath, clay tile, concrete or cinder blocks and other approved plaster bases.||$19.90|
|Easy Sand Lightweight Joint Compound (20, 45, 90)||Easy Sand Lightweight Joint Compound are chemically setting compounds for drywall interiors and exteriors that permit same-day joint finishing, and, usually, next-day decoration. Compounds are lightweight for easy handling and sand easily for fast, smooth finishing. They are ideal for heavy fills and are virtually unaffected by humidity. They provide low shrinkage and superior bond, which makes them excellent for laminating gypsum panels to gypsum panels, to sound-deadening boards, and to above-grade concrete surfaces.In addition, Easy Sand Lightweight Joint Compound can be used for filling, smoothing, and finishing interior concrete ceilings and above-grade concrete; and for finishing joints in exterior gypsum ceiling boards. To meet varying job requirements, a full line has been developed to provide a choice in setting times. The suffix number identifying each joint compound indicates an approximate setting time. For example,easy Sand 90 sets in approximately 85-130 minutes. Other setting times available are 20 (20-30 minutes); 45 (30-80 minutes).||$12.79|
|Ardex Feather Finish||ARDEX FEATHER FINISH® is formulated from a blend of Portland cement and other hydraulic cements that provides a smooth, permanent finish for a variety of substrates including sheet vinyl and VCT (vinyl composition tile). Install over concrete, masonry, wood, terrazzo, and ceramic and quarry tile – as well as properly prepared residues of cutback and other non-water-soluble adhesives on concrete – all without the need for priming or the use of a latex additive.||27.18|
|Diamond Veneer Finish||A veneer finish designed to give economical walls and ceilings a strong, hard surface that resists abrasion and surface cracking.
DIAMOND® Veneer Finish is perfect for light commercial and residential construction in single-family homes, high-rise buildings and garden apartments. DIAMOND® Veneer Finish dries in as little as 24 hours and finishes smooth, but can be job-aggregated with clean silica sand to create a textured finish.
|Portland Cement||Portland cement is the most common type of cement in general use around the world, used as a basic ingredient of concrete, mortar, stucco and most non-specialty grout||$15.08|
Call 866.375.9510 for availability. Prices subject to change without notice.