TIQUE AquaGuard is used in the Adhesively Attached System over the substrate to provide an water resistant membrane coating. This coating is used for superior protection from water intrusion, moisture from the air, and condensation.
TIQUE AquaGuard can be rolled, sprayed, or troweled on to a wide variety of substrates. TIQUE AquaGuard adheres well to concrete, masonry, wood, OSB, exterior grade gypsum sheathing, ICF (Insulated Concrete Forms), dens glass, and metals.
Tique AquaGuard provides a secondary seamless weather barrier as well as serving as a foundation for adhesive applications of EPS insulation boards.
Be sure to read our blog about Moisture Prevention in EIFS Systems HERE .
*Coverage is approximately 300-500 square feet. Two applications are necessary to ensure a continuous water resistant membrane. Coverage will vary due to ambient temperature, surface temperature, surface porosity, and/or application methods.
For more information on TIQUEwall Adhesively Attached Systems or Tique AquaGuard please call 866.375.9510 to speak with our highly trained sales associates.
DensGlass: 400-500 ft2
Gypsum Sheeting: 450-550 ft2
Cement Board: 375-475 ft2
OSB or Plywood: 225-325 ft2
(2 coats required)
