Skip to content

Mechanical Fasteners

Mechanical Fasteners
• Mechanical Fasteners are comprised of a pre-assembled galvanized screw that is coupled with a high density, impact resistant 2\” plastic stop washer.

*The large diameter of the washer provides strong resistance to positive and negative wind loads.

*The recessed channel with the plastic closure fingers over the top prevents moisture from passing through, bleeding of basecoat, and thermal bridging, as well as covering the screw head so that there is flush surface.

*The recessed area of the fastener makes it so very little basecoat adhesive is needed to fill the indentation in the EPS board.

Mechanical Fasteners

Mechanically Fastened System

On a Mechanically Fastened system, stucco wrap and EPS Foam Board is attached to the substrate using mechanical fasteners (using one fastener per square foot).

Fiberglass mesh is then embedded into Basecoat adhesive. Lastly, a textured Acrylic Stucco Finish Coat is applied.

TIQUE Finish comes in a natural white color and can be Tinted or color matched to an existing sample. Tique 100% Acrylic Finish comes in five textures: Freestyle, Fine, Medium, Coarse and Swirl.

EIFS DEPOT has it all: Stucco Wrap, Tique Aquaguard roll on moisture barrier, EPS Foam, Fiberglass Mesh, Basecoat Adhesive,Tools, Spray guns, Finish Coat and much more.

EIFS DEPOT can supply everything you need to get your job done right !

Buy your EIFS Fasteners today !

Washers are 2″ in diameter and similar to Wind-Devil 2 washers. Fasteners are 2″ plastic stop washers pre-assembled with galvanized screws. Also available without galvanized screws.

The washers only – are available in boxes of 2,000. Please contact us for pricing and availability.

Click HERE to read about Mechanical Fasteners on our blog.

Mechanical Fasteners
Mechanical Fasteners